Korg PA1000 - Page 775

Effect parameters |763
Comp - P4EQ (Compressor - Parametric 4-Band EQ)
This effect combines a mono compressor and a four-band parametric equal-
izer. You can change the order of the effects.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Routing
Compressor
Trim
Parametric 4Band EQ
Output Level
Envelope - Control
Comp
COMPRESSOR
a [C]Sensitivity 1…100 Sets the sensitivity
b [C]Attack 1…100 Sets the attack level
Output Level 0…100 Sets the compressor output level
P4EQ
c [E]Trim 0…100 Sets the parametric EQ input level
d [E]B1 Cutoff [Hz] 20…1.00k Sets the center frequency of Band 1
Q 0.5…10.0 Sets the bandwidth of Band 1
Gain [dB] –18…+18 Sets the gain of Band 1
e [E]B2 Cutoff [Hz] 50…5.00k Sets the center frequency of Band 2
Q 0.5…10.0 Sets the bandwidth of Band 2
Gain [dB] –18…+18 Sets the gain of Band 2
f [E]B3 Cutoff [Hz] 300…10.00k Sets the center frequency of Band 3
Q 0.5…10.0 Sets the bandwidth of Band 3
Gain [dB] –18…+18 Sets the gain of Band 3
g [E]B4 Cutoff [Hz] 500…20.00k Sets the center frequency of Band 4
Q 0.5…10.0 Sets the bandwidth of Band 4
Gain [dB] –18…+18 Sets the gain of Band 4
h Routing Comp › P4EQ,
P4EQ › Comp
Switches the order of the compressor and
parametric EQ