Kurzweil Flash Play PC4 - KB3 Editor: the PITCH Page; KB3 Editor: the AMP Page

Program Edit Mode
KB3 Editor: The PITCH Page
3-112
KB3 Editor: The PITCH Page
e PITCH page parameters for KB3 programs are similar to the Pitch parameters for VAST
programs on the DSP MOD page. (In KB3 programs, there are no Hz, KeyTrk, or VelTrk
parameters.) Use the Coarse and Fine parameters to transpose the entire program up or
down in semitones or cents. e parameters in the right column can be used to modulate the
pitch, and work the same as the “Pitch” modulation parameters in VAST programs. For a full
description of these modulation source and depth parameters, see “Subpage Parameters” on
page 3-56.
KB3 Editor: The AMP Page
e AMP page parameters for KB3 programs are similar to the Level parameters for VAST
programs on the DSP MOD page. (In KB3 programs, there are no KeyTrk or VelTrk
parameters.) Use the Coarse parameter to adjust the program’s pre-FX volume level up or
down in dB. e parameters in the right column can be used to modulate the volume level,
and work the same as the volume “Level” modulation parameters in VAST programs. For a
full description of these modulation source and depth parameters, see “Subpage Parameters”
on page 3-56.