Kurzweil Flash Play PC4 - Mixer

Global Mode
MIXER
9-28
MIXER
e Mixer page allows you to view and control the current state of the PC4’s 16 MIDI
channels. e currently selected Channel and Program are displayed in the top line. Press the
1-8 or 9-16 soft button to view channels 1-8 or 9-16.
Press the AUTO soft button to enable or disable automatic channel selection. When the
AUTO soft button is black (disabled), the keyboard will play the channel selected with
the CHANNEL/LAYER/ZONE/TRACK buttons. When the AUTO soft button is red
(enabled), the keyboard will play the channel of the currently selected parameter.
Use the Enable parameter to enable or disable the Program on each MIDI channel.
e Prog parameter allows you to view and change the Program number of each Channel.
e Pan and Vol parameters allow you to view and adjust the left right panning (MIDI CC
10) and channel volume (MIDI CC 7) of each Channel. You can also use sliders 1-8 to view
and adjust the channel volume of the 8 currently displayed channels.
e lock symbol next to each Prog, Pan and Vol parameter allows you to lock the current
Program, Pan and Volume setting for each channel so that it can not be accidentally changed
by external MIDI messages sent to the PC4 when using external MIDI equipment. When
the lock symbol is green, the value is unlocked and can be changed normally. When the lock
symbol is red, the value is locked. Select the lock symbol and press the Previous or Next
button to unlock or lock each parameter.
Press the BACK soft button to return to Global Mode.