Kurzweil Flash Play PC4 - Editing Samples

Keymap and Sample Editing
Editing Samples
5-10
Editing Samples
To enter the Sample Editor, rst select the program you wish to edit in Program mode.
With the program selected, press the EDIT soft button to enter the Program Editor. In the
program editor the KEYMAP page will be selected (if not press the KEYMAP soft button).
With the KeyMap parameter selected on the KEYMAP page, press the EDIT button again to
enter the Keymap Editor. On the Edit Keymap page, select the KeyRange parameter and use
the Alpha Wheel or Previous-/Next+ buttons to choose one of the available key ranges (if
there is more than one keyrange). You can edit the existing sample of a keyrange, or choose a
new sample for the keyrange and edit that. When the Keymap parameter is selected you can
hold the Enter button and trigger notes to select dierent key ranges.
If you want to select a dierent sample, use the cursor buttons to select the Sample
parameter. Use the Alpha Wheel to select a sample. Press the EDIT button once more,
and you’ll enter the Sample Editor. e sample will play through the eects of the current
program. e name of stereo samples end with an S. To use a stereo sample, the Stereo
parameter must be set to On in the Program Editor, and two keymaps must be selected, see
The KEYMAP Page on page 3-39.