Kurzweil Flash Play PC4 - Tune; FX Mode; Show Controllers

Global Mode
MAIN1 Page
9-2
Tune
e Tune parameter allows you to ne-tune the unit in cents—one cent is one hundredth of
a semitone (100 cents comprise a semitone). You can select any tuning from -100 cents to
100 cents. By default this parameter is set to 0.
Transpose
e Transpose parameter allows you to tune the pitch of the unit in semitones.
FX Mode
e FX Mode parameter determines how the PC4 responds to interrupts with regards to
eects. You can set this parameter to either Performance or Multitrack.
With FX Mode set to Performance, the PC4 minimizes disruption of existing eects when
changing Programs, and entry values will not disrupt sustained notes when changing
Programs in Program Mode. When controlling the PC4 from an external sequencer in
Program Mode, setting FX Mode to Multitrack will minimize eect disruption.
Display
e Display parameter allows you to change the way that Programs and Multis are displayed
on the Program and Multi Mode main pages by selecting one of three dierent “views”. e
default is “Large” view, which displays the Program or Multi name with large text, along
with the category name and background image. “Quick Access” view shows the names of
10 favorite Programs and/or Multis, which can be selected by pressing the corresponding
numbers on the Keypad. To access more than 10 Programs/Multis, use the CHANNEL/
LAYER/ZONE/TRACK buttons to select a dierent Quick Access Bank. (e Quick Access
view becomes smaller when the Show Zone Info parameter is set to Yes.) “List” view displays
the current Program or Multi as a selected item in a list showing the next and previous
Programs or Multis. “Large” and “Quick Access” views can also show controller assignments
and values when a controller is moved (Knobs, Sliders, Switch buttons, Wheels, and Pedals).
See “Show Controllers” below for details.
Show Controllers
When “Large” or “Quick Access” view is selected for the Display parameter (see above), the
Program and Multi Mode main pages can briey show controller assignments and values
when a controller is moved. Set this parameter to No to hide controller assignments. Set it to
Yes to briey show controller assignments when a controller is moved (Knobs, Sliders, Switch
buttons, and Wheels, but not Pedals or Pressure). Set it to Yes (Incl. pedals) to show all
controllers, including Pedals and Pressure.