Kurzweil Flash Play PC4 - The LAYER Page; Low Key, High Key; Low Velocity, High Velocity

Program Edit Mode
The LAYER Page
3-44
The LAYER Page
Use the Layer page to set the current layer’s keyboard range, velocity range, and other layer
specic parameters.
Low Key, High Key
Use the Low Key and High Key parameters to set the key range for the current layer. e
Low Key and High Key parameters set the lowest and highest active notes for the current
layer. e standard MIDI key range is C 1—G 9 (0-127). Middle C is C 4.
Low Velocity, High Velocity
Use the Low Velocity and High Velocity parameters to set the velocity range for the current
layer. e Low Velocity and High Velocity parameters set the lowest and highest active
velocities for the current layer.
Velocity values are set in 8 standard musical dynamics markings (ppp-f). e 8 available
dynamic levels each account for a range of 14-16 velocities out of velocities 1-127. is
allows for velocity switching between up to eight layers.
For ner control of velocities levels or velocity switching between up to 32 layers, follow
these steps:
1. Set the Low Velocity to ppp, and High Velocity to f.
2. Set the Layer page Enable parameter to GAttVel (Global Attack Velocity).
3. Set the Layer page Enable Sense parameter to Normal.
4. Set the layer’s velocity range in values 1-127 using the Enable Low and Enable High
parameters.