Kurzweil Flash Play PC4 - Changing the MIDI Channel; Panic

Program Mode
Changing the MIDI Channel
2-8
Once you have saved your Split or Layer as a Multi, you can continue to add additional
Zones, edit controller assignments (like eects controls and sustain pedal per Zone),
transposition per Zone, and other Multi parameters. (See Ch. 7 Multi Edit Mode for
details.)
Changing the MIDI Channel
e current MIDI channel is shown on the right side of the top line of the display. Press the
CHANNEL/LAYER/ZONE/TRACK Up or Down buttons to change the MIDI channel.
Pressing both of the CHANNEL/LAYER/ZONE/TRACK buttons simultaneously will select
MIDI channel 1.
A dierent Program can be selected for each MIDI Channel. All channels can be triggered
simultaneously from an external MIDI sequencer or computer.
Note: e Aux FX Chains of the Program on the currently selected MIDI channel are used
for Programs on all Channels.
Panic
Pressing the ENTER and KEYPAD buttons simultaneously deactivates all sounding notes by
sending an “all notes o” message on all 16 MIDI channels.