Kurzweil Flash Play PC4 - Assign an FX Mod Override; OVERVIEW Page; Select a Controller Value

Multi Edit Mode
OVERVIEW Page
7-3
Select a Controller Value
When a CONTROLS Page Entry Position, Exit Value, On Value or O Value eld is
selected, hold the Enter button and move a continuous controller to select a value.
Select a Key
When a CONTROLS Page Key or Key1-8 eld is selected, hold the Enter button and press
a keyboard key to select a key.
Assign an FX Mod Override
When an FX Page Mod Override eld is selected, hold the Enter button and move a physical
controller to assign the moved controller, or
When an FX Page Mod Override eld is selected, hold the Enter button and press one of the
keyboard keys. Each of the 88 keys will select one of the available control sources.
OVERVIEW Page
e Overview Page shows basic parameters for up to 4 Zones at a time. Use the CHANNEL/
LAYER/ZONE/TRACK buttons to view additional Zones.
Status
e Status parameter determines whether the currently selected Zone is Active or Muted.
Program
e Program parameter determines the Program for the currently selected Zone.