Kurzweil Flash Play PC4 - Page 210

Multi Edit Mode
OVERVIEW Page
7-4
e Program eld is selected, press the Previous and Next buttons simultaneously to jump
to the rst Program of each Category, as well as the Category Default Program of each
Category.
Key Range
e left Key Range eld sets the lowest key of the Zone, the right Key Range eld sets the
highest key of the Zone.
You can also set the lowest key higher then the highest key and vice versa. is allows you to
split a Zone into two areas where the lowest and highest keys now dene the region that the
Zone does not play on.
Pan
e Pan parameter determines the left/right panning of the currently selected Zone. You can
set this parameter to any pan setting from None, 0 (full left), 64 (center), to 127 (full right).
None can be entered as -1 on the keypad, which will keep the last pan setting used by the
Zone’s MIDI channel.
Volume
e Volume parameter determines the Volume of the currently selected Zone. You can set
this parameter to any volume setting from None, 0 to 127.
None can be entered as -1 on the keypad, which will keep the last volume setting used by the
Zone’s MIDI channel.