Kurzweil Flash Play PC4 - Parameter Edit; Destination; Entry Value and Control

Program Edit Mode
The PARAMS Page
3-9
Parameter Edit
Select a Parameter and press the EDIT button to view the Parameter Edit page. e
Parameter Edit page allows you to view the Parameter’s Destination, Entry Value, Control,
and Text name. e parameter name can be edited, see below for details.
Press the BACK soft button to return to the PARAMS page, or press the DELETE soft
button to delete the current Parameter.
Destination
A parameter’s Destination is automatically set when the Parameter is created, and can not be
changed. A PARAMS page Parameter will control any Program Edit or FX Edit parameter
which has it’s source eld set to the same destination number. For details see “PARAMS
Page Parameter Destination” on page 3-12.
Entry Value and Control
ese parameters are equivalent to the PARAMS page Value column and Control column.
Text
To change the Parameter’s name, use the Navigation buttons to select the Text eld, then
press the EDIT button to enter the Parameter Name page, where you can rename the
Parameter. Use the Navigation buttons and soft buttons to change the Parameter name. Press
OK to save the new parameter name, or CANCEL to return to the previous page.