Kurzweil Flash Play PC4 - The Split and Layer Soft Buttons

Multi Mode
The Split and Layer Soft Buttons
6-6
The Split and Layer Soft Buttons
e Split and Layer functions have identical parameters, but produce dierent results.
e Split function allows you to quickly create a Multi such that keys in one range of the
keyboard produce dierent sounds than another range.
e Layer function allows you to layer Programs and Multis such that more than one
instrument sound can be produced by playing one key.
e Split and Layer functions allow you to quickly create Multis without using Multi Edit
Mode to congure Zone key ranges, Programs, and volumes. After creating and saving a Split
or Layer Multi, you can edit additional Multi parameters in Multi Edit mode.
The Split Function
When you create a Split in Multi Mode, you are activating a new Zone in the current Multi.
e previously active Zones will keep their previously assigned keyboard ranges. After this
you can choose a Program that will be used in the left hand as a Split Program for the newly
activated Zone.
Follow these steps to create a Split:
1. In Multi Mode, select a Multi.
2. Press the SPLIT soft button.
3. On the “Split” Page, a new Zone is selected with a default Bass Program selected for
the left hand of the Split. Use the ALPHA WHEEL or CATEGORY buttons to select a
dierent Program for the left hand of the Split.
4. If desired you may wish to adjust additional Split parameters, described in Split and
Layer Parameters on page 2-6.