Kurzweil Flash Play PC4 - FM Amp + Output Page; Amp Parameters; Rate 1, Level 1; Rate 2, Level 2

Program Edit Mode
FM Amp + Output Page
3-95
Rate 1, Level 1
When a note is played, the Rate 1 parameter determines the rate at which the pitch changes
from Level 4 to Level 1.
Rate 2, Level 2
When a note is played and the Pitch has reached Level 1, the Pitch begins to change to Level
2. e Rate 2 parameter determines the rate at which the pitch changes from Level 1 to Level
2.
Rate 3, Level 3
When a note is played and the pitch has reached Level 2, the pitch begins to change to Level
3. e Rate 3 parameter determines the rate at which the pitch changes from Level 2 to Level
3.
e pitch remains at Level 3 for as long as a note is held.
Rate 4, Level 4
When a note is played and released, the pitch begins to change to Level 4. e Rate 4
parameter determines the rate at which the pitch changes from its current pitch to Level 3.
FM Amp + Output Page
Amp Parameters
e left-hand column of the FM Amp + Output page shows amplitude modulation
parameters for the layer. Use the left-hand column of the page to adjust and modulate the
overall output level of the current FM layer.