Global Mode
TOOLS Page
9-31
STATE
e MIDI State page shows the state of the MIDI CCs in each PC4 MIDI channel.
For example, if a channel is not making any sound, you can check the values for MIDI CC
7 (Volume) and MIDI CC 11 (Expression). Use the cursor buttons to select the Channel
or MIDI CC elds, then use the alpha wheel or previous/next buttons to select the desired
Channel and MIDI CC to view.
VOICES
Pressing the Voices soft button calls up the Voice Status page, which shows the PC4’s active
voice channels as you play.
e Voice Status pages displays each active voice as an “M” for mono voices or displays
stereo pairs of voices as an “S”. Whatever symbol the page displays, when the key of a voice
is released, that voice’s symbol on the Voices Status page turns into a “D” during the release
portion of that voice’s envelope. When the voice decays to silence, it is no longer active, and
the “D” disappears.
e Voice Status page gives you an indication of the current envelope segment of each voice.
is can give you a valuable indication of how your voices are being used. For example, if all
or most of the voices are active due to long release segments, then there’s a good chance that
when voice stealing takes place an audible voice will be reallocated.
Only one KB3 Program can be active on the PC4’s 16 MIDI channels at any time. e
bottom of the voices page indicates which of the PC4’s 16 MIDI channels (if any) has an
active KB3 program.
To Next Page
Loading...
