Kurzweil Flash Play PC4 - FXLFO+ Page

The Effects Chain Editor
FXLFO+ page
4-5
PC4 Physical Controller MIDI CC Numbers
Mod Wheel (MIDI CC 1) Slider 4 (MIDI CC 23) Knob 3 (MIDI CC 72)
Knob 8 (MIDI CC 3) Slider 5 (MIDI CC 24) Knob 2 (MIDI CC 73)
CC Pedal 2 (MIDI CC 4) Slider 6 (MIDI CC 25) Knob 4 (MIDI CC 79)
Knob 9 (MIDI CC 9) Slider 7 (MIDI CC 26) Switch 1 (MIDI CC 80)
CC Pedal 1 (MIDI CC 11) Slider 8 (MIDI CC 27) Switch 2 (MIDI CC 81)
Slider 1 (MIDI CC 12) Slider 9 (MIDI CC 28) Switch 3 (MIDI CC 82)
Slider 2 (MIDI CC 13) Variation Button (MIDI CC 29) Switch 4 (MIDI CC 83)
Knob 5 (MIDI CC 14) Sw. Pedal 1a (MIDI CC 64) Switch 5 (MIDI CC 85)
Knob 6 (MIDI CC 17) Sw. Pedal 1b (MIDI CC 66) Switch 6 (MIDI CC 86)
Knob 7 (MIDI CC 18) Sw. Pedal 2a (MIDI CC 66) Switch 7 (MIDI CC 87)
Ribbon Section 1 (MIDI CC 21) Sw. Pedal 2b (MIDI CC 67) Switch 8 (MIDI CC 89)
Slider 3 (MIDI CC 22) Knob 1 (MIDI CC 71) Switch 9 (MIDI CC 90)
Depth
e Depth eld determines the range of modulation that the Controller will apply. When
the Control source has a value of 0, the modulated parameter will be set to the Adjust value.
When the control source is all the way up, the modulated parameter will be set to the Adjust
value plus the Depth value.
FXLFO+ page
is is where you can edit the Eects-only Control sources. ese are Control sources that
can be used by the eects Mods in the current Chain. e parameters on these pages work
exactly like those of the corresponding Control sources in Program Edit mode (see The
LFO+ Page on page 3-66).