Kurzweil Flash Play PC4 - Destination Track: 1 to 16; All

Song Mode
The TRACK Page
8-26
Copy
Use the Copy function to duplicate the selected events from the current track and place them
in the same track or on another track, either merging with or overwriting existing events.
If you do not want to copy all of the MIDI events in the dened range of time on the current
track, use the Events parameter to select a specic MIDI event type you would like to copy.
Destination Track: 1 to 16 / All
Select a destination track for the copied events with the Destination Track parameter.
Copied events will be placed in the destination track(s) at any Bar and Beat you specify.
If the currently selected track is All tracks then the destination track will be All tracks as well.
Location: Bars : Beats : Ticks
Use the Location parameter to specify a bar, beat, and tick location in the destination track
where the copied events will be placed. If the length of the copied region extends from the
Location point beyond the song’s existing End point, a new End point is dened.
Mode: Merge/Erase/Slide
e Mode setting determines whether the copied events merge with, or erase existing events
on the destination track from the location point to the end of the copied region. With Mode
set to Slide, the sequencer creates space for the new events, and slides the existing events to
uniformly later times in the song.
Times: 1 to 127
e value selected for the Times parameter determines how many copies of the selected
region are placed, one after another, in the destination track.