Kurzweil Flash Play PC4 - Import CC Sequencer Settings (IMP SEQ); RIFF Page

Multi Edit Mode
RIFF Page
7-31
In Multi Mode, the CC Sequencer works the same as in Program Mode, except there is one
CC Sequencer per Zone. e CC Sequencer in each Zone can each have dierent settings,
and they can be played at the same time.
Import CC Sequencer Settings (IMP SEQ)
Press the IMP SEQ soft button to copy the CC Sequencer settings from the Program of the
currently selected Zone into the CC Sequencer page of the currently selected Zone.
RIFF Page
Ris are full songs or individual tracks of a song created in the PC4’s Song mode that you
can trigger in Multi mode. Standard MIDI les may also be imported to Song mode and
then used as ris in Multis. Every zone in a Multi can have it’s own ri—a completely
independent sequence. You can use a Multi with many ris to trigger and stop looped
sequences of dierent instrument parts. Alternatively, a single ri can play multiple
instrument parts, and each ri can be used as a dierent song section of a backing track.
Follow these steps to use a ri:
1. Go to Song mode and nd or record the song that you wish to use for your ri. Note the
song ID#, as well as the desired track and start/stop points.
2. Go to Multi mode and edit a Multi. On the Multi Edit Overview page, choose the
program that you want to use for the ri on the current zone. (Program changes that are
recorded in song mode will be ignored when using the song as a ri in a Multi.)
3. Go to the RIFF page, set the Ri to On, then select the desired song, track, song Start/
Stop points. See below for descriptions of these parameters, as well as many other
parameters that determine the behavior of a ri.
Note: By default, setting a zone to trigger a ri will disable the ability to play notes of that