EasyManua.ls Logo

Kurzweil Flash Play PC4 - Conditional Release (Condit. Rel); Local; Riff Tempo; Trigger Synczone

Kurzweil Flash Play PC4
335 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Multi Edit Mode
RIFF Page
7-34
Conditional Release (Condit. Rel)
When the Condit. Rel parameter is set to On, the ri will play when a key is pressed and
held, and other keys will not stop or restart the ri until the key original key is released. To
use conditional release, set the same range for the Trigger Range and Release Range. To stop
the ri, release the original key.
Local
When Local is set to O, notes will only be played by the ri. When Local is set to On,
notes in the current zone can be played normally by the keyboard, and by the ri.
Loop
When Loop is set to O, the ri will play once until it is retriggered. When Loop is set to
On, the ri will play in a loop until a key in the Release Range is released.
Riff Tempo
Use the Ri Tempo parameter to set the tempo of your ri. With Ri Tempo set to Song,
the ris original tempo from song mode will be used. With Ri Tempo set to Multi, the
tempo set on the Multi Edit Common page will be used. e Multi setting is useful for
tempo syncing dierent ris or arpeggiators. With Ri Tempo set to External, the ri will
sync to external MIDI clock. You can also manually choose a tempo by selecting a value from
20 to 400.
Trigger SyncZone
e Trigger SyncZone parameter determines which zone a ri will sync to when triggered.
is allows you to trigger ris in sync with other ris or arpeggios by syncing to the beat of
ris or arpeggios in other zones.
For example, if you have a drum ri in zone 1 and a bass ri in zone 2, you may always want
the bass ri in zone 2 to sync to the drum ri in zone 1. In this case you would set the bass
ri Trigger SyncZone to Ri 1.
You may want to have a little more freedom and not be tied to the drum ri as the main
timekeeper.” Maybe you want to start with the bass ri and have the drum ri start later. In
this case you would set Trigger SyncZone to First Ri Available With this setting, the ri
will look for the rst available ri to sync to. So if both the drum ri and the bass ri have
this parameter set to First Ri Available, the ri that is started rst will be the master. If the
bass ri starts rst, the drum ri will see that as the rst available ri to sync to and will do

Table of Contents

Related product manuals