Kurzweil Flash Play PC4 - The Split and Layer Soft Buttons; The Split Function

Program Mode
The Split and Layer Soft Buttons
2-5
The Split and Layer Soft Buttons
e Split and Layer functions have identical parameters, but produce dierent results.
e Split function allows you to quickly create a Multi such that keys in one range of the
keyboard produce dierent sounds than another range.
e Layer function allows you to layer Programs and Multis such that more than one
instrument sound can be produced by playing one key.
e Split and Layer functions allow you to quickly create Multis without using Multi Edit
Mode to congure Zone key ranges, Programs, and volumes. After creating and saving a Split
or Layer Multi, you can edit additional Multi parameters in Multi Edit mode.
The Split Function
When you create a Split in Program Mode, you are creating a Multi with two Zones set to
On.
e Program you were using in Program Mode is used in the right hand of the Split as the
Zone 1 Program. You can choose a Program that will be used in the left hand of the Split as
the Zone 2 Program.
Follow these steps to create a Split:
1. In Program Mode, select a Program for the right hand of the Split.
2. Press the SPLIT soft button.
3. On the “Split” Page, Zone 2 is selected with a default Bass Program selected for the left
hand of the Split. Use the ALPHA WHEEL or CATEGORY buttons to select a dierent
Program for the left hand of the Split.