Program Edit Mode
FM Operator Page
3-89
Freq Source 2
Use the Freq Source 2 parameter to modulate the Operator Frequency with a physical
controller or other control source.
Freq DepthCtl
Use the Freq DepthCtl parameter to modulate the Freq Source 2 modulation depth with a
physical controller or other control source.
When a Freq DepthCtl control source is at its minimum value, the Freq Source 2
modulation depth will be set to the value of the Freq MinDpt parameter.
When a Freq DepthCtl control source is at its maximum value, the Freq Source 2
modulation depth will be set to the value of the Freq MaxDpt parameter.
Freq DepthCtl control source values between the minimum and maximum will scale the
Freq Source 2 modulation depth between the values of the Freq MinDpt and Freq MaxDpt
parameters.
Freq MinDpt
Use the Freq MinDpt parameter to set the minimum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its minimum value, Freq Source 2 will apply the
amount of modulation set by the Freq MinDpt parameter.
Freq MaxDpt
Use the Freq MaxDpt parameter to set the maximum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its maximum value, Freq Source 2 will apply the
amount of modulation set by the Freq MaxDpt parameter.
To Next Page
Loading...
