Kurzweil Flash Play PC4 - Page 228

Multi Edit Mode
CONTROLS Page
7-22
Controller
Number
Controller
Destination
Description
110-119 MIDI 110–119
Reserved - Not available for use in the PC4.
120 Sound Off
Stops all sound in the corresponding channel.
121 RstCtls
Resets Controllers to defaults in the corresponding channel.
122 Local
Reserved for use by MIDI specication.
123 Notes Off
Sends Note Off Message to all playing notes in the corresponding channel.
124 Poly
Reserved for use by MIDI specication.
125 Omni
Reserved for use by MIDI specication.
126 Mono On
Reserved for use by MIDI specication.
127 Mono Off
Reserved for use by MIDI specication.
128 Pitch
Values above 64 and below 64 bend the pitch up and down, respectively.
129 PitchRev
Values above 64 and below 64 bend the pitch down and up, respectively
130 PitchUp
Values above 0 bend the pitch up
131 PitchDwn
Values above 0 bend the pitch down
132 Pressure
Default Destination for Pressure
133 Tempo
Tempo
134 KeyNum
Triggers playback of notes by Key Number—e.g., C4 is 60. Send a velocity rst with
Destination 135, KeyVel.
135 KeyVel Key Velocity
136 ProgInc
Program Increment—increments current Program number.
137 ProgDec
Program Decrement—decrements current Program number.
138 ProgGoto
Go to Program—selects Program.
139 MultiInc
Multi Increment—increments current Multi number.
140 MultiDec
Multi Decrement—decrements current Multi number.
141 SetpGoto
Go to Multi—selects Multi.
145 TransUp
Transpose Up (ST)
146 TransDown
Transpose Down (ST)
147 Arp Values 0-63 turn the arpeggiator Off, Values 64-127 turn the arpeggiator On
149 MuteZn
Mute Zone – Values above 64 will mute the zone that sends values to this destina-
tion, values below or equal to 64 will unmute the zone.
150 ArpOrder
Arpeggiator PlayOrder, each range of values selects one of nine settings in order of
the parameter list: 0-14, 15-28, 29-42, 43-56, 57-70,71-84, 85-98, 99-112, 113-127.
(See Play Order on page 3-28)
151 ArpBeats
Values from 0-127 change the Arpeggiator Beats value (see Beats on page 3-26 for
details).
152 ArpShift
The 88 Arpeggiator Shift steps are scaled over the 128 MIDI controller values, so
that 0 = 0 steps and 127 = 88 steps. (See Shift Amount on page 3-26 for details).
153 ArpLimit
The 60 Arpeggiator Shift Limit steps are scaled over the 128 MIDI controller values,
so that 0 = 0 steps and 127 = 60 steps. (See Shift Limit on page 3-26)
154 ArpLmtOp
Arpeggiator Shift Limit Option, each range of values selects one of seven options in
order of parameters list: 0-18, 19-36, 37-54, 55-72, 73-90, 91-108, 109-127. (See
Limit Option on page 3-24)
155 ArpVel
Arpeggiator Velocity Mode, each range of values selects one of twenty-three op-
tions in order of parameters list: 0-5, 6-10, 11-15...101-105, 106-110, 111-127. (See
Velocity on page 3-28).
156 Arp Dur
The Arpeggiator Duration % values are scaled over the 128 MIDI controller values,
so that 0 = 1% and 127 = 100%. (See Duration on page 3-31)