2KL/2KK
1-3-4
Mode setting U343 Switching between duplex/simplex copy mode Simplex copy
*1
U344 Setting the low-power mode ENERGY STAR (inch)
*1,*2
GEEA (metric)
*1,*2
U345 Setting the value for maintenance due indication 0
*1,*2
Image
processing
U402 Adjusting margins of image printing 3.0/3.5/4.5
*1
U403 Adjusting margins for scanning an original on the contact
glass
2.0/3.0/2.0/2.0
*1
U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0
*1
U407 Adjusting the leading edge registration for memory image
printing
0.0
Other U901 Checking/clearing copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking counts by optional devices -
U908 Checking the total count -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper sizes -
U920 Checking the accounting counts
U927 Clearing the all copy counts and machine life counts (one
time only)
-
U928 Checking the machine life count -
U931 Setting the automatic toner install Off
*1
U941 Setting the default magnification ratio of the default cassette 100%
*1
U942 Setting of amount of slack for feeding from DP 0/0
*1
U955 Setting operation panel type 0/0
*1,*2
U969 Checking of toner area code -
U990 Checking/clearing the time for the exposure lamp to light -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section
Item
No.
Content of maintenance item
Initial
setting*
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021
To Next Page
Loading...
