Kyocera TASKalfa 2550ci - Page 130

2MV-1
1-3-58
U100 Setting:[Bias]
1. Select an item to be set.
2. Change the setting value using the +/- keys or numeric keys.
3. Press the start key. The value is set.
Setting:[Bias]
1. Select an item to be set.
2. Change the setting value using the +/- keys or numeric keys.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Item No. Description
Display Description
Setting
range
Initial
setting
C Manual adjustment value (Cyan) 0 to 250 145
M Manual adjustment value (Magenta) 0 to 250 145
Y Manual adjustment value (Yellow) 0 to 250 145
K Manual adjustment value (Black) 0 to 250 145
Default(C) Manual adjustment base value (Cyan) 0 to 250 -
Default(M) Manual adjustment base value (Magenta) 0 to 250 -
Default(Y) Manual adjustment base value (Yellow) 0 to 250 -
Default(K) Manual adjustment base value (Black) 0 to 250 -
Display Description
Setting
range
Initial
setting
C MC DC bias (Cyan) 0 to 250 145
M MC DC bias (Magenta) 0 to 250 145
Y MC DC bias (Yellow) 0 to 250 145
K MC DC bias (Black) 0 to 250 145