2MV
2-3-17
YC15
B11 MKCNT O Analog Chager roller control voltage (Black)
Connected to
high voltage
PWB
B12 MMCNT O Analog Chager roller control voltage (Magenta)
B13 BKBACCNT O Analog Developing AC bias control voltage
(Black)
B14 HVCLKK O 0/10 V DC (pulse) Developer bias clock signal (Black)
B15 HVCLKM O 0/10 V DC (pulse) Developer bias clock signal (Magenta)
B16 24VIL O 24 V DC 24 V DC power output to HVPWB
B17 24VIL O 24 V DC 24 V DC power output to HVPWB
A1 CBACCNT O Analog Developer AC bias control voltage (Cyan)
A2 MBACCNT O Analog Developer AC bias control voltage
(Magenta)
A3 MCCNT O Analog Chager roller control voltage (Cyan)
A4 HVCLKC O 0/10 V DC (pulse) Developer bias clock signal (Cyan)
A5 BCSCNT O Analog Developer sleeve roller bias control volt-
age (Cyan)
A6 BYMCNT O Analog Developer magnet roller bias control volt-
age (Yellow)
A7 BCMCNT O Analog Developer magnet roller bias control volt-
age (Cyan)
A8 BYSCNT O Analog Developer sleeve roller bias control volt-
age (Yellow)
A9 MYCNT O Analog Chager roller control voltage (Yellow)
A10 YBACCNT O Analog Developer AC bias control voltage (Yel-
low)
A11 HVCLKY O 0/10 V DC (pluse) Developer bias clock signal (Yellow)
YC19
1 GND - - GROUND
Connected to
IH PWB
2 RELAY O 3.3 V DC Relay remote
3 24V4 O 24 V DC 24 V DC power output to IHPWB
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
