How to fix Kyocera TASKalfa 420i All in One Printer machine failure?
If your Kyocera All in One Printer is showing a machine failure message, try turning the main power switch off and on, or unplug the power cord and plug it in again. If the message persists, make a note of the error code, turn the main power switch off, unplug the power cord, and call your service representative.
Why Kyocera TASKalfa 420i cannot send document?
If your Kyocera All in One Printer cannot send a document, make sure the modular cord is correctly connected. If a send error is displayed, identify the cause of the error and try sending again. Also, verify whether TX (transmission) restriction is activated and, if so, cancel the TX restriction.
Why Kyocera All in One Printer cannot receive document?
If your Kyocera All in One Printer cannot receive a document, first check that the modular cord is correctly connected. If a communication error is displayed, address the cause of the error and ask the sender to retry. Additionally, check if RX (reception) restriction is activated and, if it is, cancel the RX restriction.
Why Kyocera All in One Printer has no print output after reception?
If there is no print output after reception on your Kyocera All in One Printer, check if memory forwarding is activated and verify the forwarding destination.
What to do if Kyocera All in One Printer says to add paper?
If your Kyocera All in One Printer displays this message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If a specific type of printing paper is specified, the necessary paper types will also be displayed. To use a different paper source, select the desired paper source and press [Continue]. You can also press [MP Tray Setting] to change the paper size/type of the MP tray. Also, make sure that the cassette is securely loaded; remove it and reload it completely.
What to do if Kyocera TASKalfa 420i says the phone receiver is off the hook?
If your Kyocera All in One Printer displays this message, it means the phone connected to the machine is off the hook. Simply hang up the handset.
What to do if Kyocera All in One Printer displays 'FAX box limit exceeded'?
If the FAX Box limit is exceeded on your Kyocera All in One Printer, it means the FAX Box capacity is full with document data. Press [End] to cancel the job. To proceed, either print or delete the data in the FAX Box, and then try the job again.
What to do if Kyocera TASKalfa 420i displays 'Job Accounting restriction exceeded'?
If your Kyocera All in One Printer indicates that the Job Accounting restriction has been exceeded, it means the number of pages used has surpassed the preset limit. No further operation is possible. Press [End] to cancel the job. To continue, reset the limit for paper use and try the job again.
Why Kyocera TASKalfa 420i cannot perform memory reception?
If your Kyocera All in One Printer cannot perform memory reception, it is likely due to insufficient free space in the memory. To resolve this, either free up memory space or receive the document after the memory has free space.
Why Kyocera All in One Printer cannot perform broadcast transmission?
If your Kyocera All in One Printer cannot perform broadcast transmission, it's likely because there isn't enough free space in the memory. Try again after freeing up memory, or create free space in the memory.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 42 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Functions | Print, Copy, Scan |
| Duplex Printing | Yes |
| Connectivity | Ethernet |
Explains various safety symbols used for warnings and precautions.
Details on machine type, printing method, supported originals, paper weight/type/size, speeds, and warm-up time.
Identifies and labels the main external components of the machine.
Identifies and labels all keys and indicators on the machine's operation panel.
Specifies environmental conditions like temperature, humidity, power supply, and location.
Details the step-by-step process for unpacking and installing the machine.
Describes the process for entering and running specific maintenance functions.
Lists all available maintenance items with their numbers, content, and initial settings.
Details on how to adjust the center line for copy images.
Details on adjusting scanner magnification for the main scanning direction.
Details on adjusting scanner magnification for the auxiliary scanning direction.
Details on adjusting leading edge registration for DP scanning.
Procedure for measuring and inputting values for original adjustment.
Procedure for adjusting settings related to DP scanning.
Explains how to access and navigate the management mode for settings.
Instructions for setting paper size and media type for each cassette.
Instructions for setting paper size and media type for the multi-purpose tray.
Explains how to change paper weight settings.
How to select the default paper source.
Information on automatic detection of originals, available for metric models.
How to select media types for automatic paper selection.
Details on how to add new contact entries to the address book.
Details on how to create groups and add contacts to them.
Instructions for setting up the internet browser.
How to set homepage, text size, display mode, and cookie acceptance policy.
Details on setting up proxy servers and specifying domains for no proxy usage.
Configures the USB memory slot for host connection.
Configures the USB interface settings.
Configures optional interface cards.
Details on how to start and activate applications.
How to view detailed information about installed applications.
Enables or disables the user authentication system.
Steps to add a new user account with access level and account name.
Enables or disables the job accounting function.
Steps to add an account for job accounting.
Information on paper misfeed indication, detection conditions, and causes.
Lists common image formation issues and their corresponding page numbers.
Troubleshooting guide for various electrical failures.
Explains the self-diagnostic function and system error codes.
Lists system errors, their contents, causes, and corrective measures.
General safety precautions to follow before starting disassembly or assembly.
Details on detaching and refitting the drum unit, main charger unit, and drum separation claws.
Instructions for detaching and refitting the developing unit.
Procedure for detaching and refitting the transfer roller unit.
Details on detaching and refitting the fuser unit, heat roller separation claws, press roller, and fuser heater.
Instructions for replacing ozone filters, dust filters, and ISU filters.
Procedure for detaching and refitting the hard disk.
Procedure for upgrading the firmware of main PWB, engine PWB, scanner, and panel.
Information on VRs that are factory-set and cannot be adjusted in the field.
Important notes regarding the replacement of the main PWB, including EEPROM transfer.
Important notes regarding the replacement of the engine PWB, including EEPROM transfer.
Details on the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
General safety precautions to follow before starting disassembly or assembly.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Details the primary and secondary paper feed subsections.
Describes the components of the scanner, mirror frame, and image scanner section.
Details the drum section, main charger unit, and cleaning section.
Describes the developing section, including developing unit and toner container.
Details the transfer roller, separation electrode, and drum separation claws.
Describes the parts of the fuser section, including rollers, heaters, and thermostats.
Explains the eject and switchback sections for paper handling after fixing.
Details the components of the duplex section for two-sided copying.
Lists and describes the functions of various Printed Wiring Boards (PWBs).
Identifies and describes the function of various switches and sensors.
Identifies and describes the function of various motors.
Lists and describes other electrical components like hard disk drives and cassette heaters.
Details the connectors and signals of the power source PWB.
Illustrates the silk-screen diagram of the Engine PWB.
Provides a silk-screen diagram of the Main PWB.
Lists all maintenance parts with their service manual names, part numbers, and alternative part numbers.
Lists available maintenance kits with their part numbers and alternative part numbers.
Outlines periodic maintenance tasks, user calls, 500K checks, and points/cautions.
Provides a chart detailing image adjustment procedures, items, images, descriptions, maintenance modes, originals, and pages.
To Next Page