LeeBoy 8616B - Page 31

Table 2-7. Hydraulic Pressures Specications
ITEM SPECIFICATION
Drive 3,625 psi (250 Bar)
Conveyors/Augers 3,000 psi (207 Bar)
Cylinders 3,000 psi (207 Bar)
Vibrator 3,000 psi (207 Bar)
Track Tension Pressure Reducing 1,200 psi (83 Bar)
Track Tension Relieving 2,300 psi (159 Bar)
Standby Pressure 400 - 500 psi (27.5 - 34.5 Bar)
Table 2-8. Hydraulic System Specications
ITEM SPECIFICATION
Drives Variable volume hydraulic proportional pump
Vibrator/Conveyors/Augers Load sense pump
Other Hydraulic Functions Load sense pump
Hydraulic Oil Reservoir w/Oil Cooler 41 gal (155 L)
Figure 2-3. Lubricant Specications
ITEM SPECIFICATION
Engine Oil 15W-40
Hydraulic Oil All Weather 32
Torque Hub 80W-90 Gear Oil
Grease Shell Avania EP Grease or Equivalent
Chain Lube Chain Lube
Front Idler 90 WT Gear Oil
Figure 2-4. Washdown
ITEM SPECIFICATION
Components Electric pump, two (2) hose reels with a 15’x 5/16” hose.
Citrus Wash-down 7 gal (26.501 L)
Figure 2-5. Electric Legend Screed Specications
ITEM SPECIFICATION
Heat
Four (4) Electric Heat Strips (1500 W) on Main
Screed,one (1) per extension (1500 W @ 220 V).
Extensions Two (2) 44-inch hydraulically operated extensions.
Vibration Two (2) hydraulic vibrators producing 2,900 vpm.
Crown/Invert
Adjustable, 2-inch crown, 1-1/2 inch of valley, with level
indicator.
Extension Vibrators - Model Vibco B-190
Extension Vibrators - Vibrations per Minute 4,600 vpm
Extension Vibrators - Input Flow Max (gpm -> lpm) 4.8 gpm (18.17 lpm) @ 800 psi (Adjustable)
Extension Vibrators - Force 332 lbs (77 N)
2
LeeBoy 8616B Conveyor Paver
2-7
Information and Specications