LEGRAND PDU - Page 326

June 2018
326 Legrand PDU User Guide
config:# security ipAccessControl ipv4 rule modify <direction> <rule_number> policy
<policy>
 Modify all contents of an existing IPv4 rule:
config:# security ipAccessControl ipv4 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
 IPv6 commands
 Modify an IPv6 rule's IP address and/or prefix length:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask>
 Modify an IPv6 rule's policy:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> policy
<policy>
 Modify all contents of an IPv6 existing rule:
config:# security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
Variables:
 <direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.
 <rule_number> is the number of the existing rule that you want to modify.
 <ip_mask> is the combination of the IP address and subnet mask values (or prefix length), which are
separated with a slash. For example, an IPv4 combination looks like this: 192.168.94.222/24.
 <policy> is one of the options: accept, drop or reject.
Option Description
accept Accepts traffic from/to the specified IP
address(es).
drop Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.
reject Discards traffic from/to the specified IP
address(es), and an ICMP message is sent to the
source or destination host for failure notification.