LEGRAND PDU - Page 327

June 2018
Legrand PDU User Guide 327
Deleting a Firewall Rule
The following commands remove a specific IPv4 or IPv6 rule from the list.
 IPv4 commands
config:# security ipAccessControl ipv4 rule delete <direction> <rule_number>
 IPv6 commands
config:# security ipAccessControl ipv6 rule delete <direction> <rule_number>
Variables:
 <direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.
 <rule_number> is the number of the existing rule that you want to remove.
Restricted Service Agreement
The CLI command used to set the Restricted Service Agreement feature begins with security
restrictedServiceAgreement,
Enabling or Disabling the Restricted Service Agreement
This command activates or deactivates the Restricted Service Agreement.
config:# security restrictedServiceAgreement enabled <option>
Variables:
 <option> is one of the options: true or false.
Option Description
true Enables the Restricted Service Agreement
feature.
false Disables the Restricted Service Agreement
feature.