LevelOne GEL-1061 - Figure 127: Configuring a Policy Map; Figure 128: Showing Policy Maps

Chapter 10 | Quality of Service
Creating QoS Policies
– 212 –
Web Interface
To configure a policy map:
1. Click Traffic, DiffServ.
2. Select Configure Policy from the Step list.
3. Select Add from the Action list.
4. Enter a policy name.
5. Enter a description.
6. Click Apply.
Figure 127: Configuring a Policy Map
To show the configured policy maps:
1. Click Traffic, DiffServ.
2. Select Configure Policy from the Step list.
3. Select Show from the Action list.
Figure 128: Showing Policy Maps