– 15 –
Figures
Figure 1: Dashboard 42
Figure 2: Home Page 44
Figure 3: Front Panel Indicators 45
Figure 4: System Information 62
Figure 5: General Switch Information 64
Figure 6: Configuring Support for Jumbo Frames 65
Figure 7: Displaying Bridge Extension Configuration 66
Figure 8: Copy Firmware 68
Figure 9: Saving the Running Configuration 70
Figure 10: Setting Start-Up Files 70
Figure 11: Displaying System Files 71
Figure 12: Configuring Automatic Code Upgrade 75
Figure 13: Manually Setting the System Clock 76
Figure 14: Setting the Polling Interval for SNTP 77
Figure 15: Configuring NTP 78
Figure 16: Specifying SNTP Time Servers 79
Figure 17: Adding an NTP Time Server 80
Figure 18: Showing the NTP Time Server List 80
Figure 19: Adding an NTP Authentication Key 81
Figure 20: Showing the NTP Authentication Key List 82
Figure 21: Setting the Time Zone 83
Figure 22: Configuring Summer Time 85
Figure 23: Console Port Settings 86
Figure 24: Telnet Connection Settings 88
Figure 25: Displaying CPU Utilization 89
Figure 26: Configuring CPU Guard 90
Figure 27: Displaying Memory Utilization 91
Figure 28: Restarting the Switch (Immediately) 93
Figure 29: Restarting the Switch (In) 93
To Next Page