LevelOne GEL-1061 - Figure 139: Configuring Remote Authentication Server (TACACS+); Figure 140: Configuring AAA Server Groups

Chapter 12 | Security Measures
AAA (Authentication, Authorization and Accounting)
– 230 –
Figure 139: Configuring Remote Authentication Server (TACACS+)
To configure the RADIUS or TACACS+ server groups to use for accounting and
authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Add from the Action list.
4. Select RADIUS or TACACS+ server type.
5. Enter the group name, followed by the index of the server to use for each
priority level.
6. Click Apply.
Figure 140: Configuring AAA Server Groups