Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
– 356 –
◆
Security Level – The following security levels are only used for the groups
assigned to the SNMP security model:
■
noAuthNoPriv – There is no authentication or encryption used in SNMP
communications. (This is the default security level.)
■
AuthNoPriv – SNMP communications use authentication, but the data is
not encrypted.
■
AuthPriv – SNMP communications use both authentication and
encryption.
◆
Read View – The configured view for read access. (Range: 1-32 characters)
◆
Write View – The configured view for write access. (Range: 1-32 characters)
◆
Notify View – The configured view for notifications. (Range: 1-32 characters)
To Next Page
Loading...
