126
such as a connection to an unauthorized device. The BPDU guard feature provides a
secure response to invalid configurations because an administrator must manually enable
the port. (Default: Disabled)
◆ Port Error Recovery – Controls whether a port in the error-disabled state will be
automatically enabled after a certain time. If recovery is not enabled, ports have to be
disabled and re-enabled for normal STA operation. The condition is also cleared by a
system reboot.
◆ Port Error Recovery Timeout – The time that has to pass before a port in the error-
disabled state can be enabled. (Range: 30-86400 seconds or 24 hours)
WEB INTERFACE
To configure global settings for STA:
1. Click Configuration, Spanning Tree, Bridge Settings.
2. Modify the required attributes.
3. Click Save.
Multiple Spanning Trees Instance (MSTI) Mapping
Use the MSTI Mapping page to add VLAN groups to an MSTP instance (MSTI), or to
designate the name and revision of the VLAN-to-MSTI mapping used on this switch.
PATH
Configuration \ Spanning Tree \ MSTI Mapping
Figure 49: Adding a VLAN to an MST Instance
To Next Page
Loading...
