155
5. Specify the information to include in the TLV field of advertised messages.
6. Click Save.
LLDP-MED Configuration
Use the LLDP-MED Configuration page to set the device information which is advertised for
end-point devices. LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery)
is an extension of LLDP intended for managing endpoint devices such as Voice over IP
phones and network switches. The LLDP-MED TLVs advertise information such as network
policy, power, inventory, and device location details. Both LLDP and LLDP-MED information
can be used by SNMP applications to simplify troubleshooting, enhance network
management, and maintain an accurate network topology.
PATH
Configuration \ LLDP-MED
Figure 62: LLDP-MED Configuration
PARAMETERS
These parameters are displayed:
◆ Fast Start Repeat Count – Rapid startup and Emergency Call Service Location
To Next Page
Loading...
