46
decrease power consumption. Port shut down can be prioritized based on assigned
temperatures.
PARAMETERS
These parameters are displayed:
Temperature settings for priority groups
◆ Priority – A priority assigned to a specific temperature. (Range: 0-3)
◆ Temperature – The temperature at which the ports with the corresponding priority will be
turned off. (Range: 0-255° C)
Port priorities
◆ Port – Port identifier.
◆ Priority – The priority level at which to shut down a port. (Range: 0-3)
WEB INTERFACE
To configure the thermal protection:
1. Click Configuration, Thermal Protection.
2. Select the circuits which will use EEE.
3. Set the temperature threshold for each priority, and then assign a priority level to each of
the ports.
4. Click Save.
4.4. Ports
Use the Port Configuration page to configure the connection parameters for each port. This
page includes options for enabling auto-negotiation or manually setting the speed and
duplex mode, enabling flow control, setting the maximum frame size, specifying the
response to excessive collisions, or enabling power saving mode.
PATH
Configuration \ Ports
To Next Page
Loading...
