262
PARAMETERS
These parameters are displayed:
◆ VLAN ID – VLAN ID of the Group.
◆ Group – The IP address of a multicast group detected on this interface.
◆ Port No – Switch Port number.
◆ Mode – The filtering mode maintained per VLAN ID, port number, and Group Address. It
can be either Include or Exclude.
◆ Source Address – IP Address of the source. Currently, the system limits the total number
of IP source addresses for filtering to be 128. Different source addresses belong to the
same group are treated as single entry.
◆ Type – Indicates the Type. It can be either Allow or Deny.
WEB INTERFACE
To display IGMP SFM Information, click Monitor, IPMC, IGMP Snooping, IPv4 SFM
Information.
MLD SNOOPING
Use the MLD Snooping pages to display MLD snooping statistics, port members of each
service group, and information on source-specific groups.
Displaying MLD Snooping Status
Use the MLD Snooping Status page to display MLD querier status and snooping statistics for
each VLAN carrying multicast traffic, and the ports connected to an upstream multicast
router/switch.
PATH
Monitor \ IPMC \ MLD Snooping \ Status
To Next Page
Loading...
