273
Displaying LLDP Port Statistics
Use the LLDP Port Statistics page to display statistics on LLDP global counters and control
frames.
PATH
Monitor \ LLDP \ Port Statistics
Figure 138: LLDP Port Statistics
PARAMETERS
These parameters are displayed:
Global Counters
◆ Neighbor entries were last changed at – The time the LLDP neighbor entry list was last
updated. It also shows the time elapsed since last change was detected.
◆ Total Neighbors Entries Added – Shows the number of new entries added since the switch
was rebooted, and for which the remote TTL has not yet expired.
◆ Total Neighbors Entries Deleted – The number of LLDP neighbors which have been
removed from the LLDP remote systems MIB for any reason.
◆ Total Neighbors Entries Dropped – The number of times which the remote database on
this switch dropped an LLDPDU because the entry table was full.
◆ Total Neighbors Entries Aged Out – The number of times that a neighbor’s information has
been deleted from the LLDP remote systems MIB because the remote TTL timer has
expired.
LLDP Statistics
◆ Local Port – Port Identifier.
◆ Tx Frames – Number of LLDP PDUs transmitted.
To Next Page
Loading...
