272
These parameters are displayed:
◆ Local Port – The port on this switch which received the LLDP frame.
◆ Tx Tw – The link partner's maximum time that the transmit path can hold off sending data
after de-assertion of Lower Power Idle (LPI) mode. (Tw indicates Wake State Time)
◆ Rx Tw – The link partner's time the receiver would like the transmitter to hold off to allow
time for it to wake from sleep.
◆ Fallback Receive Tw – The link partner's fallback receive Tw.
A receiving link partner may inform the transmitter of an alternate desired Tw_sys_tx.
Since a receiving link partner is likely to have discrete levels for savings, this provides the
transmitter with additional information that it may use for a more efficient allocation.
Systems that do not implement this option use a default that is the same as that of the
Receive Tw_sys_tx. (Refer to IEEE 802.3az for further information on these system
variables.)
◆ Echo Tx Tw – The link partner's Echo Tx Tw value.
The respective echo values shall be defined as the local link partner’s reflection (echo) of
the remote link partner’s respective values. When a local link partner receives its echoed
values from the remote link partner it can determine whether or not the remote link partner
has received, registered and processed its most recent values. For example, if the local
link partner receives echoed parameters that do not match the values in its local MIB, then
the local link partner infers that the remote link partner’s request was based on stale
information.
◆ Echo Rx Tw – The link partner's Echo Rx Tw value.
◆ Resolved Tx Tw – The resolved Tx Tw for this link (not the link partner). The resolved
value that is the actual “tx wakeup time” used for this link (based on EEE information
exchanged via LLDP).
◆ Resolved Rx Tw – The resolved Rx Tw for this link (not the link partner). The resolved
value that is the actual “tx wakeup time” used for this link (based on EEE information
exchanged via LLDP).
◆ EEE activated – Shows if EEE is activated by the neighbour device.
WEB INTERFACE
To display LLDP neighbour EEE information, click Monitor, LLDP, EEE.
To Next Page
Loading...
