34
4. CONFIGURING THE SWITCH
This chapter describes all of the basic configuration tasks for the switch management.
4.1. System
System Information Configuration
Use the System Information Configuration page to identify the system by configuring contact
information, system name, location of the switch, and time zone offset.
PATH
Configuration / System / Information
Figure 3: System Information Configuration
PARAMETERS
These parameters are displayed:
◆ System Contact – Administrator responsible for the system. (Maximum length: 255
characters)
◆ System Name – Name assigned to the switch system. (Maximum length: 255 characters)
◆ System Location – Specifies the system location. (Maximum length: 255 characters)
To Next Page
Loading...
