LevelOne GEP-1070 - Displaying MVR Channel Group; Displaying MVR SFM Information

257
Displaying MVR Channel Group
Entries in the MVR Channels (Groups) Information Table are shown on this page. The MVR
Channels (Groups) Information Table is sorted first by VLAN ID, and then by group.
Each page shows up to 99 entries, at default being 20, from the MVR Group table selected
through the "entries per page" input field. When first visited, the web page will show the first
20 entries from the beginning of the MVR Channels (Groups) Information Table.
PATH
Monitor \ MVR \ MVR Channel Groups
Figure 126: MVR Channels (Group) Information
PARAMETERS
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting
point in the MVR Channels (Groups) Information Table.
Multicast Groups
◆ VLAN ID – The VLAN ID of the group.
◆ Groups – The groups ID of the group displayed.
◆ Port Members – The ports that are members of the group.
WEB INTERFACE
To display information for MVR channel groups, click Monitor, MVR, and MVR Channel
Groups.
Displaying MVR SFM Information
This page shows the entries in the MVR SFM Information Table. The MVR SFM (Source-