288
6.2. ICMPv6 Pinging
The ICMPv6 Ping page is used to send ICMPv6 echo request packets to another node on the
network to determine if it can be reached.
After you press , ICMPv6 packets are transmitted, and the sequence number and roundtrip time
are displayed upon reception of a reply. The page refreshes automatically until responses to all
packets are received, or until a timeout occurs.
PATH
Diagnostics \ Ping6
Figure 148: ICMPv6 Ping
PARAMETERS
These parameters are displayed on the Ping page:
◆ IP Address – IPv6 address of the host.
An IPv6 address consists of 8 colon-separated 16-bit hexadecimal values. One double colon
may be used in the address to indicate the appropriate number of zeros required to fill the
undefined fields.
To Next Page
Loading...
