LevelOne GEP-1070 - System Defaults

17
1.4. System Defaults
The system defaults are provided in the configuration file “Config.xml.” To reset the switch
defaults, this file should be set as the startup configuration file.
The following table lists some of the basic system defaults.
Table 3: System Defaults
Function
Parameter
Default
Authentication
User Name
Password
RADIUS Authentication
TACACS+ Authentication
802.1X Port Authentication
HTTPS
SSH
Port Security
IP Filtering
“admin”
“ ”
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Web
Management
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Server Redirect
Enabled
80
Enabled
Disabled
SNMP
SNMP Agent
Community Strings
Traps
SNMP V3
Disabled
“public” (read only)
“private” (read/write)
Global: disabled
Authentication traps:
enabled
Link-up-down events:
enabled
View:default_view
Group: default_rw_group
Port
Configuration
Admin Status
Auto-negotiation
Flow Control
Enabled
Enabled
Disabled