209
PARAMETERS
These parameters are displayed:
System
◆ Contact – Administrator responsible for the system.
◆ Name – Name assigned to the switch system.
◆ Location – Specifies the system location.
To configure the following items see "Configuring System Information" on page 34.
Hardware
◆ MAC Address – The physical layer address for this switch.
Time
◆ System Date – The current system time and date. The time is obtained through an SNTP
Server if configured (see "Setting an IP Address" on page 35.)
◆ System Uptime – Length of time the management agent has been up.
Software
◆ Software Version – Version number of runtime code.
◆ Software Date – Release date of the switch software.
WEB INTERFACE
To view System Information, click Monitor, System, Information.
To Next Page
