285
The Port Statistics parameters are displayed as follows:
◆ sFlow Port – The port numbers for which the Flow configuration below applied.
◆ Rx and Tx Flow Samples – The number of flow samples sent to the sFlow receiver
originating from this port. Flow samples, here, are divided into Rx and Tx flow samples,
where Rx flow samples contains the number of packets that were sampled upon reception
(ingress) on the port, and Tx flow samples contains the number of packets that were
sampled upon transmission (egress) on the port.
◆ Counter Samples – The total number of counter samples sent to the sFlow receiver
originating from this port.
WEB INTERFACE
To display the sFlow statitics, click Monitor, and sFlow Agent
To Next Page
Loading...
