LevelOne GEP-1070 - Page 32

32
Menu
Description
Page
PoE
Displays status of all LLDP PoE neighbors, including
power device type (PSE or PD), source of power,
power priority, and maximum required power
265
EEE
Displays Energy Efficient Ethernet information
advertised through LLDP messages
266
Port Statistics
Displays statistics for all connected remote devices, and
statistics for LLDP protocol packets crossing each port
268
PoE
Displays the status for all PoE ports, including the PD
class, requested power, allocated power, power and
current used, and PoE priority
270
MAC Table
Displays dynamic and static address entries associated
with the CPU and each port
273
VLANs
Virtual LANs
275
VLAN
Membership
Shows the current port members for all VLANs
configured by a selected software module
275
VLAN Port
Shows the VLAN attributes of port members for all VLANs
configured by a selected software module which uses
VLAN management, including PVID, VLAN aware, ingress
filtering, frame type, egress filtering, and PVID
276
VCL
VLAN Control List
278
MAC-based VLAN
Displays MAC address to VLAN map entries
278
Diagnostics
279
Ping
Tests specified path using IPv4 ping
279
Ping6
Tests specified path using IPv6 ping
281
VeriPHY
Performs cable diagnostics for all ports or selected port to
diagnose any cable faults (short, open etc.) and report the
cable length
283
Maintenance
284
Restart Device
Restarts the switch
284
Factory Defaults
Restores factory default settings
285
Software Upload
Updates software on the switch with a file specified on the
management station
286
Configuration
288