3-10 Service Manual
7526
Motor diagnostics
Motor Direction Action Notes
Tray 1 Forward Pick from Main Tray • Will pick continuously
• View with tray removed or empty
Reverse N/A Function not supported
Align Forward Push media toward belt • Nip is closed
• Fails with waste box missing
Reverse Align leading edge Function not supported
Duplex Forward Push media down toward
input
• Will run continuously
• View with front cover split
Reverse Pick from MPF (MPF test) • Will pick continuously
• View empty or pull tray
Belt stepper Forward only Gear turns counter clockwise View with front cover open (No forward
menu)
Reverse N/A Only used to clear cleaner nip
Cartridge K – 3 Forward only Gear turns counter clockwise View with front cover open (runs PCU KM
also)
Reverse N/A Only used to clear blade nip
Cart MCY – 2 Forward only Gear turns counter clockwise View with front cover open
Reverse N/A Not used
PCU CY – 1 Forward only Gear turns counter clockwise View with front cover open
Reverse N/A Only used to clear blade nip
Fuser Forward Push media toward output
bin
Backup roll turns
Top cover should be closed
Reverse Push media toward output
bin
Backup roll is disengaged
Cam Forward Engage motor couplings • Runs to stall position
• Locks door
• Enables print operations
Reverse NOP Disengage motor couplings • Runs to stall position
• Unlocks door
• Disables printing
COD Forward Engage color cartridges • Runs to stall position
• Disables color print operations
Reverse NOP Disengage color cartridges • Runs to stall position
• Enables color printing
To Next Page
Loading...
