4-186 Service Manual
7526
UICC card removal
Warning: This part might contain customer confidential information. See “Data Security Notice” on page 4-1
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
1. Remove the top access cover assembly. See “Top access cover assembly removal” on page 4-40.
2. Place the top access assembly on a soft lint-free cloth with the touchscreen facing down.
3. Remove the six smaller screws (A) securing the position guide cover.
4. Remove the five larger screws (B) and the two smaller screws on the side (C), then remove the position
guide cover to access the cables.
To Next Page
Loading...
