Lexmark X746de - Multiple Function Printer Specifications; Memory

1-4 Service Manual
7526
Go Back
Previous
Next
Multiple function printer specifications
Memory
Flatbed scanner
Scanner type Color/monochrome flatbed scanner with ADF (automatic document feeder)
Scan technology Charge coupled device (CCD)
Light source LED lamp
Number of light sources One CCD module with one LED lamp
Flatbed dimensions Maximum: 8.5 x 14 in (216 x 356 mm)
Maximum optical
resolution
600 x 600 dpi (Monochrome and color)
Scan Area Maximum: 8.5 x 14 in (216 mm x 356 mm)
Minimum: None
ADF scanner
ADF scanner type Duplex ADF (DADF)
Optical resolution ADF
(monochrome and color)
Maximum 600 x 600 dpi
ADF input and output
capacity
50 sheets (20 lb or 75 g/m
2
bond)
ADF dimensions Maximum: 8.5 x 25 in (216 x 635 mm)
Minimum: 3.0 x 5.5 in SEF (76.2 x 139.7 mm)
Scanner media depth
(thickness)
Maximum: 0.15 mm
Minimum: 0.05 mm
Scanner media weight Maximum: 32 lb. (120 g/m
2
)
Minimum: 14 lb. (52g/m
2
)
Scan area Maximum: 8.5 in. x 14 in. (216 mm x 355 mm)
Minimum: 4.1 in. x 5.8 in. (105 mm x 148 mm)
Printer
Print technology Belt fuser
Paper feed orientation Short Edge Fed (SEF)
Fax
Modem Built-in Group 3-compatible, full function fax, 33,600bps, Max V.34 Half
Duplex
Memory
All models
Standard memory—The standard RAM is soldered onto the system board.
Memory size
512MB
Optional memory—Optional DIMM (Dual Inline Memory Module) is a card that can be plugged into an
available memory slot on the system board. Flash memory is a card that can also be plugged into an
available slot. One firmware card (DLE) and one flash memory card are supported.
Maximum number of memory (DIMM) slots
1
Maximum number of flash memory slots
1