General information 1-11
7526
Input and output capacities
The following table describes the media options that each model supports, and the estimated capacities in stand
and maximum configurations. Capacity may vary and is subject to media specifications and printer operating
environment. The capacities are based on plain paper at 75g/m
2
.
Function All models
Standard input sources
Primary tray capacity (sheets) 550
Multipurpose feeder capacity (sheets) 100
Number of standard sources (primary tray and multipurpose feeder) 2
Total standard capacity (sheets) 650
Optional input sources
550-Sheet Drawer (sheets) 550
High-capacity input tray (HCIT) (sheets) 2,000
Specialty Media Drawer (sheets)* 550
Maximum number of high-capacity input tray (must be installed on the
bottom)
1
Maximum number of standard and optional input sources* 6
Maximum capacity for standard and options input sources (sheets)* 4,300*
Standard output bin capacity (sheets) 300
Maximum output bin capacity (sheets) 300
Duplex capability Standard
* Optional input drawers include the 550-Sheet Drawer, 550-sheet Specialty Media Drawer, and High-
capacity input tray (HCIT). The maximum number of input options is dependent upon whether the MFP is
used on a desktop/tabletop or floor-standing with a caster base, and if the configuration meets UL Safety
specifications. Please refer to www.lexmark.com/multifunctionprinters for more information.
To Next Page
Loading...
