Lexmark X746de - HCIT Pick Tires Removal

4-274 Service Manual
7526
Go Back
Previous
Next
HCIT pick tires removal
1. Remove the high-capacity input tray (HCIT) media tray assembly. See “HCIT media tray assembly
removal” on page 4-265.
2. Pull the autocompensator pick arm (A) down.
3. Remove the pick tire (B) from the pick roll assembly (C).
4. Repeat for the other pick tire (D).
Note: Always replace the pick tires as pairs.
A
B C D