Lexmark X746de - Top Cover Camshaft Assembly Removal

Repair information 4-175
7526
Go Back
Previous
Next
Top cover camshaft assembly removal
See “Top cover camshaft assembly” on page 7-12 for the part number.
1. Remove the top access cover. See “Top access cover assembly removal” on page 4-40.
2. Remove the fuser. See “Fuser assembly removal” on page 4-104.
3. Remove the top screw (A), and loosen the other screw (B). This will allow you to flex the EP drive.
4. Remove the two screws (C).